มั่วรอครูนะคะ
1You must spin this trunk/tank first before you refill the water .
2 Fill up the trunk/tank . Look ,in the trunk has small tube to pump the water up.
3. There is the button for pressing the water out.
4. You should push the air inside it first . The more you pump,the stronger/harder water will come out and far way.
5. This gun has two puntures for the water come out.
6.The water has ran out. we have to fill up by the water again.
เผื่อเลือกค่ะ
1. You have to spin the tank out for filling the water
2. There is the trigger to squirt the water out
3. First of all, you have to push air into the recevoir, the more you push the air the more water out
4. This type of water gun has 2 tiny holes at the nozzle
5. No more water left, refill it.
3. There is a button to discharge water.
4. We have to pump the air into the gun before injection, The more you pump the strength you get.
5. This is 2 nozzle heads water gun. OR There are 2 nozzle heads in this water gun.
6. It's empty, Let's fill up more water.